SOLD IN PAIRS control arms designed to correct ball joint angle on vehicles lifted 2-4" while maintaining factory alignment specs 1.5" tubing with provisions for brake/ABS lines (where applicable) and gussets for increased strength 1.5" stainless steel...

SOLD IN PAIRS control arms designed to correct ball joint angle on vehicles lifted 2-4" while maintaining factory alignment specs 1.5" tubing with provisions for brake/ABS lines (where applicable) and gussets for increased strength 1.5" stainless steel...

SOLD IN PAIRS control arms designed to correct ball joint angle on vehicles lifted 2-4" while maintaining factory alignment specs 1.5" tubing with provisions for brake/ABS lines (where applicable) and gussets for increased strength 1.5" stainless steel...

SOLD IN PAIRS control arms designed to correct ball joint angle on vehicles lifted 2-4" while maintaining factory alignment specs 1.5" tubing with provisions for brake/ABS lines (where applicable) and gussets for increased strength 1.5" stainless steel...

SOLD IN PAIRS control arms designed to correct ball joint angle on vehicles lifted 2-4" while maintaining factory alignment specs 1.5" tubing with provisions for brake/ABS lines (where applicable) and gussets for increased strength 1.5" stainless steel...

SOLD IN PAIRS control arms designed to correct ball joint angle on vehicles lifted 2-4" while maintaining factory alignment specs 1.5" tubing with provisions for brake/ABS lines (where applicable) and gussets for increased strength 1.5" stainless steel...

Heavy duty 1.8" diameter front upper, front lower, rear upper and front lower control arms with 1" solid threaded adjustable stem Adjustable to provide proper geometry for vehicles lifted 0-8" Hardened rubber bushings  Vehicle Fitment Year Make...

SOLD IN PAIRS control arms designed to correct ball joint angle on vehicles lifted 2-4" while maintaining factory alignment specs 1.5" tubing with provisions for brake/ABS lines (where applicable) and gussets for increased strength 1.5" stainless steel...

SOLD IN PAIRS control arms designed to correct ball joint angle on vehicles lifted 2-4" while maintaining factory alignment specs 1.5" tubing with provisions for brake/ABS lines (where applicable) and gussets for increased strength 1.5" stainless steel...

sold in pairs control arms designed to correct ball joint angle on vehicles lifted 2-4" while maintaining factory alignment specs 1.5" tubing with provisions for brake/ABS lines (where applicable) and gussets for increased strength 1.5" stainless steel...

Heavy duty 1.8" diameter front upper and lower control arms with 1" solid threaded adjustable stem Adjustable to provide proper geometry for vehicles lifted 1-6" (16.75" at shortest and 21" fully extended center to center measurements) Hardened rubber...