Description
- Pair of front upper control arms designed to correct ball joint angle on vehicles lifted 2-4" while maintaining factory alignment specs and pair of replacement front lower control arms designed for the same 2-4" of lift
- Provisions brake/ABS lines.
- Heavy duty OEM style ball joints and hardened rubber bushings reduce deflection with minimal maintenance
- Includes cam bolts (+/- 1.5° camber and caster adjustment)
- UPPER ARMS FIT 6-LUG VEHICLES ONLY
Product Videos
Reviews
3 Reviews
-
Great components!
Im not an extreme off roader but I do rock crawl here & there. After 235k my ball joints crapped out and I thought these would fix me right up and correct the alignment issues I have with being 4-inch lifted. They did. Install was around 4-hrs per side and not too difficult. Be advised you may get the traction control light come on after installation. First get the vehicle aligned, then you tube the fix to reset the traction control computer. Works like a charm. These are a great fix. Definitely more stout than the stock uppers too.
-
Perfect Setup
Thank you for an easy transaction. The kit was higher quality than what I was expecting and went on without a problem. Heavy duty in every way and my Tacoma drives much better with the corrected geometry. I will definitely revisit for future suspension needs.
-
Upper and lower control arm set for Tacomas
Could not be happier with this setup. In my opinion this is the best budget setup you can get. Like a dingus I stripped my lower ball joint stud and these guys had a new one out in no time. I have a set of the upper arms on my 2004 4Runner with 50,000 miles on them and still appear to be running strong. If you are looking for a budget friendly but still reliable setup go with Freedomoffroad!
