Product Description
JRi Shocks brings over 100 years of collective experience in race shock absorbers to team up with Freedom Off-Road in offering the ultimate suspension kit for your 4th Gen Tacoma.
The front shocks are designed for a 1.75-inch lift but still allow for finer ride height adjustment via the spring preload. All four shocks feature 2-stage remote compression adjusters on each reservoir, allowing you to fine-tune your suspension to correlate with your terrain and comfort.
Offering an oversized 2.0" bore diameter and .75" shaft diameter, these shocks exceed all OE strength specifications & requirements.
The oversized remote reservoirs offer increased nitrogen area, providing consistency & temperature stability in any condition, resulting in constant performance. The -6 Stainless braided lines use a unique O-ring fixture device that allows complete 360° swiveling capability, relaxing any stress or torque applied to the hose in normal shock absorber motion.
Improves off-roading experience handling through the desert, trails, whoops, etc.
This JRi shock is dyno-tested to ensure excellent performance and offers FREE lifetime rebuilds.
Technical Advantages
- Cerakote finish on the shock bodies for excellent corrosion resistance
- Hard Anodize Type III for the reservoir body
- Sulfuric Anodize Type II for all remaining 6061-t6 aluminum parts, including internals
- Premium synthetic hydraulic fluid
- High-temperature low friction primary shaft seals and bearing
- 33" tire and wheel fitments with no interference
- Completely rebuildable & serviceable
- Limited Lifetime Warranty
- Hand built and every shock dynamometer tested, and data stored at JRi
- Remote reservoir mounting hardware included
- Designed and manufactured in the U.S.A.
- CONTROL ARMS DESIGNED TO CORRECT BALL JOINT ANGLE ON VEHICLES LIFTED 1.75"-3" WHILE MAINTAINING FACTORY ALIGNMENT SPECS
- 1.5" TUBING WITH PROVISIONS FOR BRAKE/ABS LINES (WHERE APPLICABLE) AND GUSSETS FOR INCREASED STRENGTH
- HEAVY DUTY OEM STYLE BALL JOINTS AND HARDENED RUBBER BUSHINGS REDUCE DEFLECTION WITH MINIMAL MAINTENANCE
- BALL JOINTS COME PRE-GREASED AND ARE FULLY REPLACEABLE
| Year | Make | Model | Submodel | Drive |
|---|---|---|---|---|
| 2024 | Toyota | Tacoma | ||
| 2025 | Toyota | Tacoma |
